Download Free Medical Hearing Aids PowerPoint Presentation

Hearing Aids PowerPoint Presentation

DOWNLOAD MEDICAL POWERPOINT PRESENTATION

About This Presentation

Description : electronic devices usually worn by a person for amplifying sound before it reaches the auditory receptor organs.

Tags : Hearing aid,Hearing Assistance Technologies,Hearing

Published on : Apr 21, 2024 | Views : 2320 | Downloads : 2

Shareable Url :

Embed Code :

Comment

Transcript

Slide 1-

Chapter 7 Hearing Aids and Hearing Assistance Technologies
Slide 2-

Purpose of Listening Devices Make speech audible Make non-speech audible Restore range of loudness
Slide 3-

Hearing Challenges Hearing soft speech Hearing speech clearly Hearing speech in noisy environment Hearing speech in reverberant environment
Slide 4-

Definition of Hearing Aid Hearing Aids (noun, plural) 1 (archaic): electronic devices usually worn by a person for amplifying sound before it reaches the auditory receptor organs. 2 (modern): electronic devices worn by a person for processing sound to provide audibility and improve the signal-to-noise ratio before it reaches the auditory receptor organs. A New Definition for Modern Hearing Aids, Victor Bray, Ph.D. & Michael Nilsson, Ph.D., Auditory Research Department, Sonic Innovations, Inc.
Slide 5-

Types of Listening Devices Hearing Aids ALDs/HAT Alerting Devices Brainstem Implants Bone Anchored Hearing Aids (BAHA) Cochlear Implants (CI)
Slide 6-

Hearing Aid Styles Air conduction Body Aid Glasses BTE RITE RITA ITE ITC CIC Bone Conduction Bone Anchored (BAHA) (above 20 years) (now considered a mastoid implant)
Slide 7-

Open Canal Receiver in the Ear RITE Receiver in the Aid RITA
Slide 8-

Bone conduction HA When a conventional hearing aid cannot be worn due to microtia, atresia, obstruction in EAM, bone conduction hearing aids may be beneficial
Slide 9-

BAHA Bone Anchored Hearing Aid: Surgically embedded titanium "post" into skull with a small abutment A sound processor sits on abutment The implant vibrates the skull and stimulates the cochlea via bone conduction bypassing outer & middle ear Treatment for: Conductive loss Mixed hearing losses Unilateral sensorineural hearing loss, Chronic ear infections Congenital external auditory canal atresia
Slide 10-

Hearing Aids Analog (conventional) Programmable (analog or digital) Digital
Slide 11-

Type of Hearing Aids
Slide 12-

HA Components Microphone The microphone picks up sounds from the air and convert them into electrical signals.Amplifier The amplifier increases the intensity of the signals from the microphone. Filters modify the sounds so that only sounds which are relevant for the person are amplified.'Loudspeaker' (Receiver)The third basic component is the 'loudspeaker' (receiver). It converts electrical signals into acoustic signals, which the person then hears.Small computer (Digital) (How it works)These three components exist in all hearing aids. Furthermore, in digital hearing aids a small computer can be programmed to manipulate the signals to fit the hearing loss of the individual hearing-impaired person.
Slide 13-

Batteries Various Sizes Chemical
Slide 14-

Earmolds Earmolds direct sound into the ear canal Variety of styles, colors, and other characteristics
Slide 15-

Verification of HA Real Ear (probe microphone) Speech tests (HINT, QuickSIN, BKB-SIN, SPIN) Subjective ratings of intelligibility and quality Loudness verification Questionnaires Functional gain ABR—for infants & young children
Slide 16-

Probe Microphone Real Ear measures of sound pressure in the ear canal
Slide 17-

Speech Tests HINT QuickSIN BKB-SIN SPIN
Slide 18-

QuickSIN/BKB-SIN 1. SNR loss of 0-2 dB: Normal to near-normal. These patients will probably do well in noise with any hearing aids that provide undistorted output. With directional microphones, they may hear better than their normal-hearing peers in noisy situations. 2. SNR loss of 2-7 dB: Mild SNR loss. Today’s directional microphones provide SNR improvements of 2 to 5 dB; with directional microphones, these patients should be able to hear almost as well as their normal-hearing counterparts in noisy situations. 3. SNR loss of 7-15 dB: Moderate SNR loss. While directional microphones will provide benefit for these patients, they cannot provide enough SNR improvement to allow the person to hear as well as their normal-hearing counterparts in noisy situations. Microphone arrays, such as the LinkiT, provide a 7 to 13 dB improvement in SNR. 4. SNR loss greater than 15 dB: Severe SNR loss. These patients need the maximum amount of SNR improvement, and FM systems are the technology of choice for these patients. Today’s ear-level FM systems are cosmetically appealing and are available in a wide range of hearing aids. Contact hearing aid manufacturers for more information.
Slide 19-

Subjective Ratings Magnitude Production Pt is given a number and instructed to adjust a given parameter such as intensity, SNR, until that number is reached Category Scaling Pt is given a bounded scale such as 1 to 10 and asked to make a judgment of a speech passage based on intelligibility, quality, etc. Paired Comparisons Pt compares 2 different settings or hearing aids Clarity Pt asked to judge if sound is clear, distinct, pure…the opposite is diffuse
Slide 20-

Loudness Restoration PAL Soft, comfortable, loud
Slide 21-

Functional Gain Compare Aided vs. Unaided results In the example, the aided (green) thresholds are compared to the unaided thresholds for the right (red) and left (blue) thresholds
Slide 22-

Questionnaires APHAB PAL
Slide 23-

Binaural vs. Monaural Advantage head shadow loudness summation localizing signal to noise ratio
Slide 24-

ALDs/HAT
Slide 25-

ALDS/HAT Loop Induction (Loop)(Electromagnetic) Radio Frequency AM FM FM plus Video BlueTooth Light (Infrared)
Slide 26-

ALDs/HAT Loop Induction Systems
Slide 27-

Looping the World with Audiocoil “The ordinary telecoil is perhaps the most common and most underestimated assistive listening device available for hearing impaired individuals today.” Ross (2002). “By changing the label to something more general—my suggestion is ‘audiocoil’—we do not restrict to a single function the way we think of the coil”. Ross (2006). Telecoils are about more than telephones. The Hearing Journal, 59, 24-28.
Slide 28-

LI Components Microphone Loop amplifier Loop wire Telecoil
Slide 29-

Loop Inducton Large area Home area (cushion loop pad)
Slide 30-

Loop Options Silhouette: Near telecoil and signal relatively low therefore less susceptible to) most EMI (ElectroMagnetic Interference). Stay aligned relative to the hearing aid, they are less sensitive to head position. Neckloop: Drive both hearing aids (not with true stereo, but with a mono signal into both aids). Does not require wires running up the neck to the hearing aid(s), and can be worn under a shirt or jacket. Portable Loop Portable and able to carry Communicate one on one or in small groups, cars, etc.
Slide 31-

Loop Induction LI transmits via an electromagnetic field and require no receiver if the hearing aid wearer has a telecoil Oval Window
Slide 32-

Loop Induction: Telecoils Inductive/audio loop systems transmit an electro- magnetic field Receivers are not necessary for hearing aid wearers with a telecoil (the telecoil itself is the receiver) Loop receivers can be provided for people who do not have telecoils. Loops are often permanently installed Neckloop Direct audio input Silhouette inductor
Slide 33-

ALDs/Hat Radio Frequency Systems
Slide 34-

Radio Frequency FM (radio frequency) systems transmit radio waves to receivers Used in classrooms and where mobility is required Not affected by light, able to cover 100+ feet, and are portable Systems can be set to different frequencies to allow several uses in same place Miniaturized FM receivers using the 216-217 mhz range are available as an attachment for some BTEs and CI processors Some FM transmitters have built-in microphones that can switch from an omnidirectional, directional and/or super directional setting Susceptible to some radio interference
Slide 35-

Radio Frequency Systems Phonak Multi-frequency receivers (MLxS, ML8S and ML9S) synchronized automatically using the WallPilot or directly with Campus S. The MLxS also has a standardized connector that makes it compatible with both Phonak hearing instruments and BTEs from other manufacturers Single-frequency receivers (MLx, ML8, ML3-7) single-frequency receiver which clips to BTE hearing aid MicroLink CI S miniaturized FM receiver for cochlear implant users that attaches directly to the bodyworn speech processor WallPilot hangs at the entrance to a room and performs an Automatic Frequency Synchronization (AFS) and ensures that the multi-frequency receivers of wearers entering the room are automatically set to the correct frequency
Slide 36-

Phonak iLink
Slide 37-

Phonak SmartLink
Slide 38-

ppt slide no 38 content not found
Slide 39-

FM Radio Frequency Systems Phonic Ear Sprite BTE FM used by people of all ages who have hearing abilities ranging from normal to profound loss used in the car, at restaurants and parties, watching TV, on tours, and talking with others across a distance. students with ADD or CAPD benefit Toteable
Slide 40-

Oticon
Slide 41-

AVR
Slide 42-

BlueTooth Bluetooth is a short-range, wireless, digital communication standard. Bluetooth devices send data and voice in a clean, clear, digital format audio signal is not subject to the same sources of signal degradation that sometimes compromise the quality of analog (FM, AM or inductive) transmissions. Radio frequency transmission in the 2.4-gigaHertz range
Slide 43-

BlueTooth Advantages Bluetooth signal is extracted from the noise; it alone is transmitted and amplified, while noise is rejected. Minimizes battery consumption for portable devices Also, it places an intentional limit on the range of transmission — the most common version has a range of 10 meters which helps to avoid interference among nearby devices Walls and other obstacles have a negligible effect on Bluetooth transmission
Slide 44-

BlueTooth Interference Advantage
Slide 45-

Starkey
Slide 46-

ELI
Slide 47-

ALDs/HAT Infrared Systems
Slide 48-

Infrared Infrared systems transmit sound via infrared light waves to receivers worn by users IR commonly used in courtrooms, movies, and live performance theaters, conventions and with TVs (signal contained in room) Infrared systems may be susceptible to interference from bright sunlight or fluorescent lights Requires line-of-sight between the IR transmitter and the receiver, IR waves can effectively reflect off some surfaces, depending upon the power of the transmitter
Slide 49-

Audiovisual FM AudiSee Assistive device to facilitate speechreading and hearing, primarily in educational settings Portable Camera and microphone worn by speaker less strain to speechread when teacher moves about the classroom or turns to write on the blackboard
Slide 50-

Sound Field Systems Portable or permanently installed speakers placed close to listeners at a distance from the speaker They are most often used in classrooms and are helpful for people with mild to moderate loss They offer a secondary benefit to those who are not HOH Wireless speakers perform the same function. Audio Enhancement Video 1 Audio Enhancement Video 2
Slide 51-

Vibrotactile Devices Tactaid - small, battery-powered instruments that can help a deaf person understand sounds by allowing the user to feel the unique pattern of vibrations present in every sound
Slide 52-

Hearing assistive technology (HAT) refers to devices and services that help deaf and hard of hearing people compensate for their hearing loss four primary categories of technology: assistive listening devices alerting devices telecommunications devices visual communication devices
Slide 53-

ALDs/HAT Function Catch the desired sound as cleanly as possibly (using well-selected microphones or a direct audio feed) Carry the sound intact via a specific type of transmission to a receiver (using infrared light waves, radio waves, induction, or wires) Couple the receiver to the hearing device or ear with as little background noise, feedback or distortion as possible (using neckloops, silhouettes, cords, headphones, or earbuds, depending on the user's equipment or lack thereof).
Slide 54-

How ALDs/HAT Help Bypassing or minimizing background noise Overcoming the weakening effect of sound traveling through air Reducing the effect of poor room acoustics
Slide 55-

ALDs (HAT) assistive listening devices and systems (including couplers and accessories for hearing aids and cochlear implants) alerting devices and systems (weather, doorbell, phone, fire/smoke alerting devices) amplified telephones (some of which have tone controls and/or audio output jacks) and telephone accessories TTYs (teletypewriters), VCO (Voice Carry Over) phones, CapTel, and telecommunications-related software and services speech-to-text services and technology, such as CART (Computer Assisted Realtime Transcription), C-Print and CAN; closed caption decoders videophones and other visual technology to facilitate speechreading and/or the use of sign language or cued speech
Slide 56-

TELECOMMUNICATIONS Television Telephones POTS Cell Phones
Slide 57-

TELECOMMUNICATIONS: TV Television There are two ways to understand communication on TV: hear it or read it: closed captions, a menu option ability built into most TVs (TVs over 13 inches in diameter sold after 1993). ALDs Increase volume on a personal receiver, not TV sound across the room Most are cordless and utilize different types of technologies Some devices marketed specifically for TV use Hearing aid users and non hearing aid users can use technologies
Slide 58-

TELECOMMUNICATIONS: PHONES Two needs with phones: understanding conversation on the phone knowing phone is ringing There are two ways to understand the conversation on the phone: hear it or read it. There are four basic types of telephone amplifiers: portable, handset, inline and phone set.
Slide 59-

TELECOMMUNICATIONS: PHONES Types of telephone amplifiers: Portable Handset Inline phone set
Slide 60-

TELECOMMUNICATIONS: PHONES Portable amplifiers Not recommended for regular use Inconvenient--strapped onto a phone handset and need to be turned off after use or the battery runs dead Occasionally helpful with wireless phones that do not have amplification May make a phone hearing aid compatible Peace of mind for use while traveling
Slide 61-

TELECOMMUNICATIONS: PHONES In-line amplifiers devices that connect to the jack in the phone where the curly handset cord plugs in may be a good value, as some go as high as 40 dB Compatible with most phones, home and business.
Slide 62-

TELECOMMUNICATIONS: PHONES Amplification handsets Replace original phone receiver Less popular Adjustment controls in the handle In some cases, not electrically compatible universal amplifier (battery or A/C powered) used for compatibility
Slide 63-

TELECOMMUNICATIONS: PHONES Amplified phones Many features Some provide 50 dB gain. Louder not always helpful for clarity Some provide tone control Additional features (optional) variable ringer sounds built-in ringer light flash big buttons for dialing audio jack HAT may require electrical outlet connection cordless amplified phones
Slide 64-

TELECOMMUNICATIONS: PHONES TTYs do NOT use voice recognition TTYs are data terminals that allow hard of hearing or deaf people to read typed messages Some TTYs have a keyboard for typing a response helpful to consumers who do not have clear speech majority of hard of hearing prefer to voice their response. Therefore styles of TTYs that are designed specifically to support VCO (voice carry over) may be appealing One portable version is the size of a deck of cards and can be strapped onto most phone receivers. TTY users communicating directly with another TTY or a relay service used to type spoken message to TTY user VCO users find very appealing as they can read & talk and not worry about missing hearing message With VCO, the TTY is then used for reading only. With computer, it is possible to purchase software to emulate TTY signals
Slide 65-

TELECOMMUNICATIONS: PHONES Other telecommunications devices pagers, cellular phones, fax machines, email and Internet chatting, and text-based intercoms phone company custom calling helpful features caller ID (for calling back the person through relay distinctive ringing (for differentiating voice and TTY calls) voice mail (to listen to voice messages with amplified phones or via the relay service)
Slide 66-

ppt slide no 66 content not found
Slide 67-

ppt slide no 67 content not found
Slide 68-

ppt slide no 68 content not found
Slide 69-

Hearing Aids and You!
Slide 70-

ppt slide no 70 content not found
Slide 71-

Cochlear Implants Medel Advance Bionics Cochlear